Team External Combustion Jeep Cherokee
14 Nov

Suspension 101

Having all the horsepower in the world won’t do you any good unless you’re able to properly transfer it to the pavement. And that involves, in some form or another, a vehicle’s suspension.

Suspension is a broad term given to a vehicle’s systems of linkages, springs and shocks/struts to control ride and handling. Ride is the car’s ability to keep occupants comfortable and isolated from road noise and harshness. Handling is the ability to corner, brake and accelerate all the while maintaining tire contact with the road.

The single most important function of the suspension is to maintain that contact. Without it, there’s not much chance for any of us to maintain control of our cars while moving down the road.

Most suspension systems can be classified as independent or dependent. This refers to whether movement at one wheel can directly affect the opposite wheel. Dependent systems are tied together. Examples of dependent suspensions are beams or live axles that hold the wheels perpendicular to the frame and parallel to each other at all times. A wheel on one side directly and oppositely affects the wheel on the other side while driving over a bump in the road.

suspension 101 controlarm 600x450 Suspension 101

Independent systems allow a better ride and handling due to lower unsprung weight and the ability of each wheel to deal with road activity without altering the suspension geometry of its opposite. Examples of this are a MacPherson strut setup or a double wishbone (a-arm) suspension.

Anti-sway bars are used to give the vehicle additional stability by joining one side of the suspension to its opposite. This creates a more level ride by reducing roll around corners. It’s important to note that by connecting the suspension components of a vehicle in this way does not change an independent design into a dependent one.

The spring is the part of a suspension that handles the majority of energy absorption. Most springs are coil or leaf styles. Coil springs are a torsion bar wound around an axis. They became popular after WWII, and especially during the 1970s with the prevalence of front-wheel drive and the need for more sophisticated designs.

The leaf variant dates back to at least medieval times when used on carts and carriages. The simple design is (typically) a stack of arc-shaped spring steel leaves attached to the frame at both ends. The attachment can be direct bolting or through a shackle. A shackle allows the leaf spring to elongate during use making for softer springiness.

suspension 101 springs 600x450 Suspension 101

Springs do an excellent job of storing energy, but aren’t particularly adept at absorbing it. This is where shock absorbers or dampers come in. They control the unwanted motion of the spring by turning the energy of the excessive suspension movement into heat and dissipating it in the hydraulic fluid.

So far, all of these systems are passive. They just deal with the bumps in the road as they come and within a limited scope. Some modern cars, like this 2011 Cadillac CTS use an active suspension that uses electronic monitoring and makes real-time adjustments for different conditions.

GM was by no means the first to use an active system. Citroën developed a semi-active suspension in the 1950s using hydropneumatic technology. Hydraulic fluid levels out the ride through a series of nitrogen-filled spheres. A good example of this system can be found in this 1967 Citroen DS21.

So there you have it. Suspension in a nutshell. Check out the products available on eBay to learn more about your vehicle’s specific system. Later this week we’ll look at how steering affects much more than which way you point your wheels.

Tags: , , , , ,

Category: Community, Parts & Accessories, Tips and Guides

Leave a Reply

eBay Motors Mobile App - Available on the itunes App Store
;